Page 1 of 1

XV1100 intake boots [SOLVED]

Posted: Sat Dec 07, 2019 5:49 pm
by ross
hi , I'm ross from bpt ohio . I'm converting my xv 1100 from a manifold and 1 carb back to the original 2 carb set up . I have 2 new intake boots 1 has 1 vacuum port and the other has 2 vacuum ports . my question is which one goes on which side of the bike or can I just run a longer line if I do it wrong. I just don't want to fight these carbs on and end up having to take em back off to switch the boots . thanks

Re: XV1100 intake boots [SOLVED]

Posted: Sat Dec 07, 2019 6:17 pm
by ViragoJoe
ross wrote:
Sat Dec 07, 2019 5:49 pm
hi , I'm ross from bpt ohio . I'm converting my xv 1100 from a manifold and 1 carb back to the original 2 carb set up . I have 2 new intake boots 1 has 1 vacuum port and the other has 2 vacuum ports . my question is which one goes on which side of the bike or can I just run a longer line if I do it wrong. I just don't want to fight these carbs on and end up having to take em back off to switch the boots . thanks
Ross,
The CARBURETOR BOOT with the Single Vacuum Port is for the FRONT Cylinder Carburetor.

The CARBURETOR BOOT with the Dual Vacuum Ports is for the REAR Cylinder Carburetor.

Click Image to Enlarge:
CARBURETOR INTAKE BOOTS XV1100 XV920 XV750 XV700.jpg

Re: XV1100 intake boots [SOLVED]

Posted: Sat Dec 07, 2019 6:32 pm
by ross
Thanks Much . I'm goin now to get it . fast reply can't thank enough .