1984 XV700 Float issue (Ohio)

Have a question about fixing something on a Yamaha Virago XV700? Post it here!

Moderators: ViragoJoe, choppin

User avatar
ViragoJoe
Moderator
Moderator
Posts: 2513
Joined: Wed May 20, 2015 10:36 am
Location: S.E. Michigan, USA
What Virago you Own: 1996 Virago Special XV1100SH

Re: 1984 XV700 Float issue (Ohio)

Post by ViragoJoe » Tue Jul 20, 2021 4:11 pm

capymotiv wrote:
Tue Jul 20, 2021 2:34 pm
I caught the little rascal. It is as I thought. When the carbs are in correct position, the needles are falling out far enough to get cocked on the float tab. Managed pics this time.
Capy,

I would start over with New Floats, New Needles and New Seats. Something isn't right with your current parts makeup.
ViragoJoe 🇺🇸
1996 XV1100SH Virago Special
"Never ride faster than your Guardian Angel can fly!!"
;)


NOTE TO ALL:
:arrow: Please edit your profile to include your location.
It will aid us in assisting you!

capymotiv
Posts: 6
Joined: Sat Jul 17, 2021 12:06 pm
Location: Ohio
What Virago you Own:

Re: 1984 XV700 Float issue (Ohio)

Post by capymotiv » Sat Jul 24, 2021 6:19 pm

Well, I got them going. For reasons beyond me, I set the float height from the main boss to 16mm and they worked. The external level was even dead on when installed on the bike. It even quit dropping the needles. Mind you I tried everything from 12mm to the recommended 19mm. Don't know what to say but thanks everyone.

Post Reply